Transform your laser processes with unbeatable prices and an exceptional 2-year guarantee on all diode laser modules.


all categories

  • Prodotti
  • Categorie


the laser installation preparation work for the minilab machine

Regarding the laser installation preparation work for the minilab machine (applicable to Noritsu, Frontier, Polaroid, Tailai and other brands).
Minilab machine installation warning:

In order to avoid the basic causes of laser failure errors in color enlargement machines, please follow the following installation requirements:

– The machine should be used in a location with a relative humidity of 30% to 75% and an ambient temperature of 18 to 30°C. Alternatively, use an air conditioner to maintain room temperature.

– Do not install the machine in dusty or violently vibrating locations.

– Do not raise or lower the room temperature suddenly. If you do this, moisture in the air can condense on the machine, causing the laser to fog up, electronics and circuit boards to malfunction, and more.

– When the equipment is installed and grounded, the ground resistance is less than 4 ohms.

Please follow the engineer’s training instructions or read the instructions carefully before using the machine, and then operate the machine correctly.

If you don’t have a guide, feel free to send us questions and we’ll get back to you as soon as possible.

Post time: Dec-28-2023